The DLTC 300 is a Digital Switched-mode Temperature Controller that combines high efficiency with full digital control of PWM (pulse width modulation).
The DLTC 300 has a full digital PID loop with additional optional external correction.
A set of analogue monitors ensures easy system integration. Settings are non-volatile: set up and forget.
In Stock
DLTC 300 DIGITAL TEMPERATURE CONTROLLER
£458
Parameter | Description | LTC 100 |
---|---|---|
Power | Single | +5 V to 30 V (Vdd) |
Input sensor | NTC, PTC thermistor | 10, 50, 100, 250, 500, 1000, 1500 µA activation current |
Compliance voltage | 2V | |
Temperature | Internal Set point | Software selected |
External Set point | 0-5 V through 14 pin connector or software defined | |
Stability Over 1 hour | 0.001 C (with 20 K thermistor) | |
Output | Bipolar current | +/-15A |
Current limit | Symmetrical. User defined between 0 and Imax | |
Compliance voltage | 8V typical maximum value | |
P-I control | Digital Controlled | |
Power | 60 W maximum without heatsink | |
Security | Software programmable voltage and current limits | |
Connectors | Power & TEC | Terminal blocks with M3 Screw |
Digital Control | USB B | |
Analog Data | 14 pin Molex MiniFit (mating part Molex 430251008) | |
Monitor | Actual temperature | 0-5V following sensor voltage |
Set temperature | 0-5V requested sensor voltage | |
Actual current | 0-5V following current with 2.5V offset | |
Fault | Active high 5V fault line | |
Dimensions (WxHxD) | 89 x 89 x 23 mm | |
Weight | 240 g | |
Storage Temp | -55 to 100 C | |
Operating Temp | -40 to 85 C |