- Features: Linear Temperature Control for Thermo-Electric Elements and Resistive Heaters
- Applications: Laser, Detectors, Precision Instrument, OEM applications
- Power: Single, +5 V to 30 V (Vdd)
- Input sensor
- NTC, PTC thermistor: 10μA, 100μA, 200μA,1 mA activation current
- AD590: 1μA/K output, LTC has 10.0 KOhm load resistor
- RTDs: 1mA, 10mA activation current
- LM135: 10 mV/K output, 1 mA activation current
- Compliance voltage: Smaller of 5V or Vdd-0.5V
- Temperature
- Internal Set point: 11 turn potentiometer 0-5V, jumper selected
- External Set point: 0-5 V through 14 pin connector, jumper selected
- Stability Over 1 hour: 0.001 C (with 20 K thermistor)
- Output
- Bipolar current: +/-10A
- Current limit: Symmetrical 0 to Imax
- Compliance voltage: Vdd-2.5V
- P-I control: Proportional (2-100 A/V) and Integral (0.55-5 A/(V x sec)
- Heat dissipation: 60 W maximum without heatsink
- Security: Disable current if sensor voltage drops below 0.4V
- Connector: 14 pin Molex MiniFit
- Monitor
- Current limit: 10 bar LED 0 to Imax
- Set point error: Coarse indication of set point error with variable gain
- Dimensions (WxHxD): 89 x 89 x 28 mm
- Weight: 195 g
- Storage Temp: -55 to 100 C
- Operating Temp: -40 to 85 C
|
