img
img
img
img
img
img
In Stock
C150 Laser Controller

incl. TEC controller. Laser controller: 0 – 250 mA; > 4.0 V. TEC: 0 … +- 1.0 A /1.5A; voltage > 8.0 V

Pay attention to Pin Layout compatibility!

£713.00
- +

The Laser Controller C150 combines an integrated temperature driver and laser driver in one package. Temperature control is fully linear; a separate power supply can be used for the laser TEC. TEC control can be via the built-in PI loop or an external signal. The laser driver has an analog bandwidth of 250 kHz; a separate fast TTL compatible switching is provided via a SMB connector. The laser current has a hardware limit of 250 mA which cannot be exceeded without customization.

Pay attention to Pin Layout compatibility!



Parameter Description C150
Examples of Compatible Diodes NEL/NTT
Power Dual Option 1: +12V/2A or-12V/0.5 A Option 2: +12V/0.5A or-12V/0.5A or +5V/1.5A
Laser Current Control Laser current 0 - 250 mA. Hardware limit. Can be modified for customized versions
Compliance voltage > 4.0 V
Setting accuracy 2 % fs
Noise (RMS) < 2µA
Drift < 20 µA
Temperature coefficient 50 ppm/C
Current limit 250 mA
Setting accuracy of current limit 2 % fs
Laser External Control Voltage range 0 --> 10 V
Input impedance 10 kOhm
Modulation coefficient ( I const ) 20 mA/V
3dB Bandwidth DC … 250 kHz
TTL modulation, rise / fall-time 250 ns
Interlock Yes
TEC control TEC current 0 … +- 1.0 A /1.5A
TEC voltage > 8.0 V
Max output power 12 W
Current limit 1A or 1.5 A
Input sensor Thermistor 10 kOhm or 100 kOhm at 25 C
PID control Internal PI control or External direct TEC current control
Connectors Laser Integrated Azimuth Electronics 14 pin connector with heat sink. NEL DFB laser pinout. Can be replaced with optional DB15 connector.
Power Molex MicroFit 8 pin.
Control Molex MicroFit 12 pin.
Dimensions (WxHxD) 120 x 92 x 30 mm
Weight 350 g
Storage Temp -55 to 100 C
Operating Temp -40 to 85 C
Parameter Description C150 C151 C154 C158 C190
Examples of Compatible Diodes NEL/NTT TOPTICA (EAGLEYARD) NANOPLUS on request Sheaumann
Power Dual Option 1: +12V/2A or-12V/0.5 A Option 2: +12V/0.5A or-12V/0.5A or +5V/1.5A Option 1: +12V/2A or +12V/0.5A Option 2: +5V/1.5A; -12V/0.5 A Option 1: +12V/2A or +12V/0.5A Option 2: +5V/1.5A; -12V/0.5 A Option 1: +12V/2A or +12V/0.5A Option 2: +5V/1.5A; -12V/0.5 A +5 V, 1.5 A;
Laser Current Control Laser current 0 - 250 mA. Hardware limit (possible up to 500 mA) 0 - 250 mA. Hardware limit (possible up to 500 mA) 0 - 250 mA. Hardware limit (possible up to 500 mA) 0 - 250 mA. Hardware limit (possible up to 500 mA) 0 - 500 mA.
Compliance voltage > 4.0 V > 4.0 V > 4.0 V > 4.0 V 0.8- 3.0 V
Setting accuracy 2 % fs 2 % fs 2 % fs 2 % fs 2 % fs
Noise (RMS) < 2µA < 2µA < 2µA < 2µA <0.5%
Drift < 20 µA < 20 µA < 20 µA < 20 µA 1 µs –CW
Temperature coefficient 50 ppm/C 50 ppm/C 50 ppm/C 50 ppm/C 50 ppm/C
Current limit 0 - 250 mA 0 - 250 mA 0 - 250 mA 0 - 250 mA 0 - 500mA
Setting accuracy of current limit 2 % fs 2 % fs 2 % fs 2 % fs External and internal
Laser External Control Voltage range 0 --> 10 V 0 --> 10 V 0 --> 10 V 0 --> 10 V 0 --> 5V
Input impedance 10 kOhm 10 kOhm 10 kOhm 10 kOhm 10 kOhm
Modulation coefficient ( I const ) 20 mA/V 20 mA/V 20 mA/V 20 mA/V 100 mA/V
3dB Bandwidth DC … 250 kHz DC … 250 kHz DC … 250 kHz DC … 250 kHz 3 ns, electrical
TTL modulation, rise / fall-time 250 ns 250 ns 250 ns 250 ns 100 ns
Interlock Yes Yes Yes Yes Yes
TEC control TEC current 0 … +- 1.0 A /1.5A 0 … +- 1.0 A /1.5A 0 … +- 1.0 A /1.5A 0 … +- 1.0 A /1.5A 0 … +- 1.5A
TEC voltage > 8.0 V > 8.0 V > 8.0 V > 8.0 V > 3.0 V
Max output power 12 W 12 W 12 W 12 W 4 W
Current limit 1A or 1.5 A 1A or 1.5 A 1A or 1.5 A 1A or 1.5 A 1.5 A
Input sensor Thermistor 10 kOhm or 100 kOhm at 25 C Thermistor 10 kOhm or 100 kOhm at 25 C Thermistor 10 kOhm or 100 kOhm at 25 C Thermistor 10 kOhm or 100 kOhm at 25 C Thermistor 10 kOhm or 100 kOhm at 25 C
PID control Internal PI control or External direct TEC current control Internal PI control or External direct TEC current control Internal PI control or External direct TEC current control Internal PI control or External direct TEC current control Internal PI control or External direct TEC current control